ElliptiSafe® - Texas Bridge Rail (T80HT)

ElliptiSafe® - Texas Bridge Rail (T80HT)is an elliptical, parapet bridge rail used on bridges and highways across the country. The elliptical rail provides an open aesthetically pleasing bridge rail with the added advantage of being suitable for MASH TL-5 applications as per M23: Appendix B.

ElliptiSafe®from CSP® is a mill-rolled elliptical tube that offers superior consistency in profile and fit with the splice tube compared to locally manufactured rolled round pipe.

FEATURES
  • This rail has been evaluated and accepted to be of equal strength to railings with like geometry which are suitable for MASH TL-5 applications
  • Meets Waka Kotahi NZ Transport Agency requirements as per M23: Appendix B
  • Higher strength-to-weight ratio than standard round pipe
  • Easier field handling
  • Accommodates horizontal curves as low as 72m radius without pre-curving
SPECIFICATIONS
Elliptical tube:203.2mm x 123.8mm x 4.8w.t
Elliptical joiner sleeve:187mm x 108mm x 5.56w.t
Steelwork:Hot dip galvanised to AS/NZS 4680:2006
Texas Rail height from road level to top of rail:1274 mm
Maximum Rail member section:9000 mm
Minimum Rail member section:5000 mm
Maximum Rail post spacing:2540 mm
Thickness of Foot plate:25 mm
STANDARDS AND APPROVALS

Currently no Standards and Approvals specified for this product.